It is very important to clean your washing machine regularly. This is because dirt can get built up and cause a huge number of problems with the machine. You need to keep the drum clean, as well as the lint trap. In addition, you need to use the right cleaning agents in order to maintain the cleanliness of the machine.
Baking soda
Baking soda is a great way to clean your washing machine. It works by breaking down overflowing suds and reducing bacteria, and it also deodorizes your clothes. This will help your machine to stay squeaky clean.
You may already be familiar with using baking soda to clean your kitchen counters, but you should also know that it is a great tool to help you clean your clothes. In fact, it’s one of the best green laundry products you can buy.
Using it is easy and inexpensive. Adding a little to your laundry will get rid of dirt and odors, and it will make your fabrics look brighter and smell fresher.
A half-cup of baking soda can create a cleaning boost. If you have a lot of stains or a heavy odor problem, try adding it to your washing machine to see if it helps. Alternatively, you can soak your clothes in it overnight.
Vinegar
Vinegar is an excellent cleaner that can be used to keep your washing machine clean. It can help you get rid of stains and odors and it can also soften your clothes. But you should be careful when using vinegar on your washing machine. Excessive use can damage your washer and may even cause leaks.
Aside from cleaning your washing machine, vinegar can be used to treat mildew on towels. You can wash your towels on the highest heat setting and allow them to dry.
Distilled white vinegar is an effective way to clean dirt and odours from your clothing. Use only half a cup, however, as too much can damage your clothing.
The acetic acid in distilled white vinegar is considered to be relatively mild. If you do not like the smell of distilled white vinegar, you can substitute lemon juice or citric acid.
Bleach
Bleach is a powerful cleaner and can be used to clean your washer. However, it should be used carefully. If you apply bleach to the wrong place or if you overuse it, it can ruin your clothes.
Before you start using bleach, make sure you’re wearing protective gloves. You should also be sure your area has adequate ventilation.
To properly clean your washing machine, first remove the detergent drawer and scrub it thoroughly. Then, add hot water and half a cup of bleach to the tub. Allow the bleach to soak for at least an hour. This should kill any odors in your laundry.
After the bleach has soaked, you can use your empty washer for a rinse cycle. This will help flush any remaining bleach from the drum.
Cleaning the drum
Washing machine drums can become very dirty, especially if you have pets. You can also get odours in your washing machine if it is not cleaned regularly. Luckily, there are some simple ways to get your washing machine drum clean.
First, you need to remove any lint that has accumulated in the bottom of the seal catchment. Use a soft cloth to wipe it out.
After you have removed the lint, you can use a microfiber cloth to wash the outside of your washer. Make sure to dry the surface thoroughly before using it again. This will help to avoid any lint or residue from forming on the inside of your washer.
If you don’t have a microfiber cloth, you can use a cleaning solution or a regular washing machine soap to clean the inside of your washing machine. Then, use a scourer to wash away any dirt and residue from the bottom of the drum.
Cleaning the lint trap
Keeping the lint trap in a washer clean helps the clothes to dry faster. It also saves energy. Having a clogged lint trap can slow down the drying process, requiring you to run the machine longer. The lint trap in a washing machine may be located in the center agitator, along the top rim of the tub, or in the drainage hose. You can find this trap by checking the owner’s manual.
A lint trap is used to trap non-biodegradable materials, such as lint and pet hair. Lint is often coated with detergent residue and fabric softener. This is why a lint trap needs to be cleaned on a regular basis. Not cleaning it can cause the pipes and septic lines to clog, which can lead to plumbing problems, water contamination, and expensive repairs.
