If you want to clean your Airpod case, there are many ways to do so. Whether you want to clean it with a cloth or brush, or you want to remove fingerprints, there are a few tips to remember.
Alcohol
You may want to clean your AirPods regularly to prevent a buildup of foreign bodies that can interfere with their performance. Using rubbing alcohol and a soft cloth to wipe down your case is an easy way to do this.
Before you start cleaning your AirPods, it is important to check whether you have earwax or any other debris inside your case. This can block the charging port and cause the device to not charge properly.
You should clean your AirPods at least once a week. It’s recommended that you clean the exterior of the case as well, as stains can form on the case over time. Leaving these marks on your case can make the earbuds look unsightly.
If you’re planning to clean the exterior of your AirPods, you will also need a soft lint-free cloth. Never use water on an AirPods case, as moisture can get into the charging ports.
Microfiber towel
If you own Apple AirPods, it is important to clean them frequently. They can get dirty in unexpected places. It is best to keep them charged and in a special case to avoid dust and dirt in the charging port.
Cleaning your AirPods can be a quick and simple process if you use the right tools. To clean them, you will need a microfiber towel, a soft-bristled brush, and a few other supplies. You can also use a bit of isopropyl alcohol.
You should also be careful not to use any abrasive or sharp objects when cleaning your AirPods. This can damage the construction.
A soft-bristled brush is the perfect tool to remove stubborn stains. It can also be used to remove wax buildup. For the best results, make sure it is a lint-free cloth.
Compressed air
When it comes to cleaning AirPods, there are numerous methods to choose from. The most obvious is the aforementioned compressed air. But aside from removing dust, you can also use it to clean out your charging ports. You should only try this trick if you have a problem charging your device.
Another option is to buff out your AirPods using a microfiber cloth. Aside from the aforementioned airborne contaminants, lint is another possible culprit. To prevent it from ruining the performance of your device, it is best to avoid letting your hands come in contact with it.
There is actually a simple trick to do this. Just use duct tape to hold the two sides of your AirPods together. This will allow you to access the insides of the charger port without touching any of the wires.
Dry cotton swab
If you are using your AirPods regularly, it’s important that you clean them at least weekly. Dirt buildup can block charging contacts, preventing them from performing properly. A good way to clean the AirPods is with a dry cotton swab.
The AirPods are durable and lightweight, but they can get dirty in places you wouldn’t expect. Clean them up to make sure they stay looking new.
Clean the AirPod case inside and out. Make sure you don’t soak it in water or use compressed air to clean the inside of the case. Using abrasive materials can also damage the internal components.
Don’t use abrasive cleaning agents, scrubbing pads, or anything that isn’t lint free to clean the case. These can damage the battery or metal contacts.
Cleaning AirPods with a dry cotton swab will remove dirt and wax. It will also help to remove the earwax that can collect around the speaker’s edges.
Avoid liquids
If you’re not careful, you can ruin your AirPods case. The good news is, you can clean the exterior of your case using a bit of isopropyl alcohol. However, you should be cautious about getting any liquid inside the charging ports. You’ll want to avoid soaking the Lightning port with any solution.
One of the best ways to get the most out of your AirPods is to clean them often. Whether you use a brush or Q-tips, this will help get rid of dirt, earwax, and other debris. It will also make your work environment more pleasant.
In addition to cleaning the outside of your AirPods case, you should also keep the charging ports free of debris. This will prevent them from shorting out. Also, it will allow you to charge them quickly.
